Bymat Electrolyte NT for Neutralising Electrolytes 1l

Stock Code: ABHB1251
MPN: B1251

Descriptions

A container of electrolyte ET dark embossing fluid, for embossing steel.

Electrolyte ET is used specifically for embossing vanadium steels. this fluid is best applied with a polishing felt and a stencil. Pour a small amount of the Bymat Electrolyte ET solution into a wide mouth receptacle and immerse the felt. The fluid should be brushed over a few times to obtain the best results and colour. After the solution is applied it will turn a dark grey colour, is best to remove the remaining electrolyte with a wet cloth after, a preservative (electrolyte KO) should be applied.

The ET electrolyte solution should only be used on Vanadium steels otherwise results may vary on colour and clarity

Comes in 500ml 1 Litre and 5 Litre bottles.